射线跟踪法的改进及其应用

研究复杂组合体目标后向散射场问题，并对射线跟踪法的典型算法进行改进，以提高计算精度和运算速度。推导精确的积分公式，用典型体目标对改进的算法进行验证，进而计算复杂组合体目标的后向散射场。矩形截面直进气道的计算结果不仅比学者Hao Ling的计算结果更为精确，而且计算速度提高了两倍。三面角反射器的计算结果与实验结果基本吻合。最后，计算了某型航母甲板上复杂目标组合体目标的RCS，并与近似法和像素法的计算结果进行了比较分析。     

Do RadioAstron detections correlate with flaring states? An initial study of seven southern AGN

We examine the state of seven southern radio sources at the time of their RadioAstron AGN Survey observations. Both ATCA flux density monitoring data and Fermi light-curves are considered in determining the relative activity of the source. A simple hypothesis, that sufficiently compact source structure exists for detections on RadioAstron baselines when the source is in a flaring state, is qualitatively tested. We find four instances of RadioAstron detections during flaring radio states and four instances of RadioAstron non-detections during fading or quiescent radio states, in support of the hypothesis. However, we also find three instances of RadioAstron detections during quiescent or fading radio states, and two non-detections during a flaring state, indicating that the situation is (not unexpectedly) more complex. Radio and gamma-ray monitoring such as that described here, together with the full RadioAstron AGN Survey results, will allow a more thorough investigation of the dependencies of detections on baselines of >10 Earth diameters.     

涡桨飞机发动机进气道排除异物特性数值方法研究

根据适航规范针对常见的两种外来异物：冰雹与冰块进行本体特性研究,确定两种外来异物的几何、质量以及初始姿态特性。耦合计算流体力学(CFD)以及六自由度方法(6DOF),开展涡桨发动机进气道以及旁通道中的异物运动排除特性数值模拟,分析其气动特性以及运动轨迹。针对运动中可能存在的碰撞现象,进一步联合LS-DYNA软件进行仿真分析,建立合理有效的涡桨发动机进气道外来异物排除数值模拟方法。以某型涡桨发动机为例,两种异物的计算结果表明,一旦异物与壁面发生碰撞,碎裂成若干很小的碎块,能量损失,对发动机威胁较小,无论是进入主发动机或者旁通道,均可认为排除。但是,由于下壁面结冰区的冰块容易直接进入主发动机,有可能造成严重影响,需要重点关注。     

Vision-based pose estimation for cooperative space objects

Imaging sensors are widely used in aerospace recently. In this paper, a vision-based approach for estimating the pose of cooperative space objects is proposed. We learn generative model for each space object based on homeomorphic manifold analysis. Conceptual manifold is used to represent pose variation of captured images of the object in visual space, and nonlinear functions mapping between conceptual manifold representation and visual inputs are learned. Given such learned model, we estimate the pose of a new image by minimizing a reconstruction error via a traversal procedure along the conceptual manifold. Experimental results on the simulated image dataset show that our approach is effective for 1D and 2D pose estimation.     

压气机叶片外物损伤模拟的撞击能量当量法

在分析外物与叶片间的运动态势后，提出压气机叶片外物员伤模拟的撞击能当量法，即使得摆锤的势能与外物摘击叶片时可能达到的功能相等。据此，设计并制作了摆锤装置，并实验观察到钛制压气机叶片损伤形态与撞击能量间的变化关系，即随着撞击能量的增加，损伤形态产生的顺序为，压痕→突缘→裂纹→突缘呈４５°剪切破坏，这与外场收集到的叶片的前缘损伤形态一致，同时，采用了ＴＣ４压气机叶片进行了相应的高周疲劳试验，验证了方法     

大型客机CATIII级精密进近着陆设备的适航性要求

本文主要研究CATIII运行的适航性，首先介绍了适航性的基本概念，同时指出运输类飞机有关设备、系统及安装的适航标准，然后根据进场、着陆和滑跑三个飞行阶段，从性能、完好性、有效性三个方面提出系统适航性的具体要求，此外还包括某些自动飞行控制系统的适航要求，最后简述有关使用和维修方面的持续适航性。     

Dynamical evolution of high area-to-mass ratio debris released into GPS orbits

A large set of simulations, including all the relevant perturbations, was carried out to investigate the long-term dynamical evolution of fictitious high area-to-mass ratio (A/M) objects released, with a negligible velocity variation, in each of the six orbital planes used by Global Positioning System (GPS) satellites. As with similar objects discovered in near synchronous trajectories, long lifetime orbits, with mean motions of about 2 revolutions per day, were found possible for debris characterized by extremely high area-to-mass ratios. Often the lifetime exceeds 100 years up to A/M ∼ 45 m²/kg, decreasing rapidly to a few months above such a threshold. However, the details of the evolution, which are conditioned by the complex interplay of solar radiation pressure and geopotential plus luni-solar resonances, depend on the initial conditions. Different behaviors are thus possible. In any case, objects like those discovered in synchronous orbits, with A/M as high as 20–40 m²/kg, could also survive in this orbital regime, with semi-major axes close to the semi-synchronous values, with maximum eccentricities between 0.3 and 0.7, and with significant orbit pole precessions (faster and wider for increasing values of A/M), leading to inclinations between 30° and more than 90°.     

空间邻近目标跟踪与航迹关联的联合优化算法

针对单传感器跟踪空间邻近目标过程中存在航迹交错的问题,提出一种基于分布式多传感器融合结构的跟踪与航迹关联联合优化算法.该算法在单帧航迹全局最优航迹关联的基础上,通过航迹关联质量检测传感器航迹是否存在交错,然后构造交错航迹对的拟测量,并根据拟测量误差协方差计算融合“测量”,最后由融合中心对融合“测量”进行全局最优点迹-航迹互联和交互多模型(IMM)滤波更新融合航迹.考虑分布式融合系统约束情况,给出采用次优拟测量的替代方法.仿真结果表明,与传统航迹关联算法相比,联合优化算法能够明显提高目标跟踪精度和身份正确率.     

On a non-primordial origin of the cosmic background radiation and pregalactic density fluctuations

Dusty pregalactic Population III objects may provide a mechanism for an effective thermalization of the star radiation. They may generate the observed microwave background and so the high cosmic photon entropy. Assuming a tepid universe a smaller primordial entropy contribution results in reasonable mass scales and amplification factors of pregalactic density fluctuations.     

直升机抛射物体平衡及稳定性分析

基于部件级建模理论建立了建立直升机-外挂装置系统六自由度飞行动力学模型。对所建模型进行了配平计算，与参考数据进行了对比。计算分析了不同速度下采用不同方式抛射物体时直升机的稳定性。结果表明，单侧抛射由于反冲力不对称，抛射物体对于直升机的滚转角和横向周期变距有显著的影响；随飞行速度增大，抛射物体对于直升机横向荷兰滚模态稳定性影响增大，当前飞速度达到50m/s以上时，荷兰滚模态演变为两个发散的非周期模态，稳定性明显变差，直升机应在较低速度下抛射物体。